Skip to content
Thoughtfully made intimates. Made for your brand.Let’s create together ↗
ES

Category feasibility enquiry

Shapewear Manufacturer: Assess Your Development Brief

Prepare a shapewear manufacturing brief covering zones, fit, materials and evidence. DIYASI category capability, minimums and testing require confirmation.

By DIYASI · Published

DIYASI is an underwear manufacturer in Yiwu. This shapewear manufacturer enquiry page helps a buyer prepare a category-specific development assessment; it does not establish a verified shapewear production range. A high-waisted underwear style is not evidence of a defined compression level, and the published underwear MOQ must not be transferred to an unconfirmed shapewear project. Send the intended silhouette, support zones, measurements and required evidence to the team. Category capability, material availability, minimum quantity and sampling schedule need written confirmation before an order can proceed. No slimming, medical, postpartum or therapeutic performance claim is offered on this page.

Capability requires confirmation. This page is a procurement assessment, not an offer of a verified production range for this category.

Define support without inventing a pressure rating

Describe the intended garment and which areas should feel more or less supportive. Distinguish a design preference from a measured compression claim. If a buyer requires a pressure value, test method or regulated positioning, those requirements belong in the technical and evidence brief before development. Do not infer them from fabric tightness, a high rise or a marketing photograph. Ask the prospective manufacturing team to identify what it can document and what would need independent testing.

Review entry, movement and edge behaviour

A garment must be practical to put on and remove as well as match its intended appearance. Prepare a fit assessment that considers waist and leg edges, rolling, gusset access, seams and movement. Record observations by sample size and garment version. Changing a support panel can affect nearby areas, so evaluate the assembled garment rather than approving isolated fabric swatches alone. Any sizing recommendation should follow the final measurement chart and sample assessment, not a general instruction to size down.

Keep unverified claims out of launch materials

Before writing product copy, separate observable construction details from effects that require supporting evidence. A panel map, composition and fastening description can be recorded from the approved specification. A claim about body change, recovery or health needs a different level of substantiation and is not supplied by this procurement page. Decide which evidence is required for the target channel and who will obtain it. If manufacturing feasibility or the required evidence cannot be confirmed, pause this category instead of substituting ordinary high-waisted briefs under a shapewear label.

Specifications to verify before sampling

SpecificationPublished reference / confirmation needed
CategoryDevelopment assessment only; manufacturing capability must be confirmed
Fabric weight (gsm)No verified model-specific weight published; request a measured specification
Colour and processConfirm model-specific availability, dye/print method and approved colour reference; do not infer a stock colour count
Minimum quantityCategory-specific MOQ not established; written assessment required
SamplingCategory-specific schedule to be agreed after feasibility review
Bulk productionCategory-specific production schedule not published

MOQ and a comparable written quotation

A quantity reference describes the garment order, not an all-inclusive service package. Keep the sample fee, development work, labels, custom elastic, packing and freight visible as separate quotation questions. No verified price ladder is available for this page, so it does not publish invented unit costs or volume discounts. Ask for like-for-like quotations using the same specification and destination assumptions. For an assessment-only category, even the garment minimum remains open until the team confirms feasibility.

The website does not publish a verified unit-price ladder. Request your actual quantity and specification through the enquiry form; a quotation is required before making a cost or discount assumption.

Private-label components and their limits

DIYASI's existing private-label information lists waistband artwork, care labels, heat-transfer logos, hangtags and packaging as options for review. Each option must work with the selected construction and materials. Ask what can be retained from the source model and what changes require another sample or component purchase. The list is not a promise that every combination is available at the catalogue minimum. Approve placement, content and physical application; a brand file alone is not a complete manufacturing instruction.

ComponentAvailable review routeApproval boundary
WaistbandCustom artwork on a suitable selected styleMethod, stretch, placement and component MOQ must be confirmed
Woven / care labelSubmit artwork and destination requirementsNo automatic certification, composition or legal claim
Heat-transfer logoReview with the actual fabric and constructionDo not assume every material accepts the same process
HangtagApprove text, dimensions and attachmentBrand artwork rights and final information remain explicit
Bag / box / stickersReview the requested packing formatPrinted components may have a separate minimum and charge

Review the existing labels and packaging information ↗

Quality checks and certification evidence

The published factory process describes incoming-material, inline-production and final checks. Use the approved measurements, construction, labels and packing instruction to define what those checks need to cover for your order. An AQL guide explains how a buyer can prepare an inspection plan; it is not a factory certificate or a universal acceptance threshold. No current certificate number or product-specific test report is asserted here. Request the relevant document, its validity and its product or facility scope before using a certification or performance claim.

Factory information and inspection stages · Prepare an AQL inspection and defect checklist

Six decisions from brief to dispatch

1. Define the project and its boundaries

Timing: Timing confirmed after brief review

Send the destination market, intended garment, model references and quantity by style. Separate confirmed requirements from questions that need the factory's response. Include the proposed size and colour allocation rather than only a total quantity. This gives the team a basis for identifying missing information, checking category feasibility and explaining which development or component decisions are still open. Keep the enquiry and its revisions together so a later quotation can be traced to the brief it actually answers.

2. Review materials and branded components

Timing: Availability and component schedule confirmed in the quotation

Compare the proposed composition, construction, colours and trims with the source model or technical specification. Review artwork, label information and packaging as separate inputs. Ask the team to identify any material substitution, component minimum or development charge before treating the proposal as accepted. A digital proof can settle artwork details but does not prove the feel or behaviour of a finished garment. Record the agreed material references and request a physical sample appropriate to the project.

3. Request and assess the sample

Timing: Catalogue reference 5–7 days; not a promise for unconfirmed categories or new development

Confirm when sampling begins and what the sample will represent. Review fit, finished measurements, construction, component composition and branding against the agreed brief. Note which details are final and which still need a revised sample or proof. Courier delivery and review rounds are separate from sample-making guidance. Use a dated comments record and retain the physical reference so the production decision is based on a specific version rather than a general impression from a photograph.

4. Approve the specification and commercial terms

Timing: Buyer and factory approval milestone; no fixed duration published

Reconcile the garment quantity with the size-by-colour grid, then confirm unit pricing and all separately charged items in writing. Identify the approved sample, artwork files, labels, packing method and delivery terms. Ask how changes or unavailable components will be handled after approval. Do not allow a missing measurement, unclear material description or unresolved category question to become an assumed manufacturing instruction. Both sides should be able to identify exactly which version has been released for production.

5. Produce and inspect against the approved record

Timing: Underwear reference 20–35 days, subject to quantity and customization; other categories require confirmation

Agree the production milestones and inspection scope for the actual order. Incoming material checks, inline checks and final inspection serve different purposes and should reference the same specification. If a defect, shade difference or packing issue is found, document the affected lot and the agreed action. A general process description is not proof that a particular batch passed. Request the records required by your purchasing procedure and keep them associated with the correct product and order version.

6. Confirm packing, dispatch and reorder information

Timing: Dispatch and transit quoted separately for the chosen route

Check final quantities, labels, carton markings and packing documents before dispatch. Confirm the delivery arrangement and which party is responsible for each transport step. Retain the approved sample and the final specification after shipment because they are useful references for any question about the received goods. A reorder still needs current availability, price and schedule confirmation. Use feedback by style and size to prepare that request instead of assuming that every earlier commercial or material condition remains unchanged.

Purchasing questions

Does DIYASI have a verified shapewear range on this page?

No. This is a development assessment route. Confirm category capability, specifications, minimums and any performance evidence in writing before planning production; high-waisted underwear is not proof of compression performance.

How is the sample schedule confirmed?

This category needs a feasibility review before a schedule can be confirmed. The underwear catalogue's 5–7 day sample guidance is not a promise for this proposed development. Confirm sample charges, revisions and courier time separately.

Are published unit prices or automatic quantity discounts available?

No verified unit-price ladder is published here. Request a written quotation identifying the style, composition, quantity, size and colour allocation, branding, packing and delivery terms. Ask for development, component and freight charges separately so offers can be compared on the same basis.

What payment and approval terms apply?

Request the current payment terms in your written quotation; no universal deposit percentage is stated here. Approve the physical sample, final specification, artwork, packing instruction and agreed schedule before authorising production. Use the existing contact form to submit the project brief.

Send your manufacturing brief ↗

YOUR NEXT COLLECTION

Your sample shortlist.

A considered collection starts with one style.

Explore the collection ↗

Your shortlist.

The details
Fabric
Fit
Rise
Sizes
Starting quantity
Selection

Confirm the size/color mix and any custom-component minimums with your sample brief.